-
Integrating a scale with a coating machine in a hazardous area
A RADWAG case describes connecting a weighing system to a third-party pharmaceutical coating machine at TIEFENBACHER GROUP. The installation required both communication compatibility and equipment suitable for the hazardous location.
-
Transferring liquid-density values using a mass comparator
The BelGIM case describes creating a liquid-density reference system using a calibrated silicon sphere, hydrostatic weighing and temperature control. The sphere was weighed in air and in the liquid under investigation with an AGV4-1000 comparator.
-
Assessing a microbalance workstation before installation
The steel-mill case describes a site assessment carried out before installing a microbalance and antivibration table. The evaluation considered the room and workstation rather than relying only on the balance specification.
-
DWM HY10 Basic checkweigher joins the range
The DWM HY10 Basic is a compact production-line checkweigher with throughput of up to 150 items per minute. An MWMH magnetoelectric measuring module works with brushless drives and a pneumatic rejection system.
-
Analytical balance functions that support reliable measurement
An analytical balance combines a sensitive measuring system with features intended to control disturbances and handling. Adjustment corrects the instrument response against a reference; it should be distinguished from calibration and from independent performance checks.
-
Selecting a microbalance using repeatability and minimum weight
A microbalance is intended for very small samples, but the finest display division is not enough to establish suitability. Repeatability describes the spread of repeated measurements under comparable conditions and is commonly expressed as a standard deviation.
-
Japanese menus added to RADWAG 5Y devices
RADWAG has extended the language options in its 5Y software with Japanese. The update lets Japanese-speaking operators use supported balances and other 5Y devices through menus in their own language.
-
Preparing the environment for sensitive weighing
The conditions around a balance can limit performance even when the instrument has an appropriate specification. Assess vibration, temperature, humidity, air movement, lighting and nearby sources of electromagnetic disturbance.
-
New XA 41/120.5Y.A and XA 121/220.5Y.A analytical balances
Two dual-range analytical balances have joined the 5Y portfolio. The XA 41/120.5Y.A offers capacities of 41/120 g with 0.002/0.005 mg readability. The XA 121/220.5Y.A offers 121/220 g with 0.005/0.01 mg readability.
-
Comparing PS X7 and WLC X7 precision balance workflows
The source compares two precision-balance families through their weighing ranges, adjustment arrangements, interfaces and records. PS X7 models include automatic internal adjustment, while WLC X7 offers a different capacity and readability range suited to other routine tasks.
-
Modbus TCP/IP added to 5Y balances and CY10 scales
RADWAG has introduced Modbus TCP/IP communication for 5Y and CY10 equipment. The interface allows a PLC or other controller to request readings and operate weighing functions over an industrial network.
-
WLC X7 precision balances replace the WLC X2 range
The WLC X7 series introduces a 7-inch display with configurable widgets and a clearer overview of weighing information. Wireless connectivity, two RS232 ports and USB-A/USB-B provide options for peripherals and data transfer.






















































































































