UMA 200.5Y automatikus tömegkomparátor

Code: WL-415-0007

Termékek összehasonlítása
Ajánlatkérő lista
Megtekintés2

UMA200.5Y

 
UMA 200.5Y comparators represent the highest class of professional-level automatic mass comparators. They enable comparisons of mass standards as low as 1 to 200 g in class E1 and lower classes. The unit is manufactured in a 30-position version – it has a storage for 30 mass standards. The versatility of this solution makes it possible to compare both entire sets of mass standards in one process and just a few standards of the same mass.

 

 

 

Best Repeatability of Measurements in a Short Time

The UMA automatic comparators feature the best repeatability of measurements, thanks to the elimination of the “human factor”, air drafts and temperature changes. The consistent design of the device means that the mass standards are close together, reducing calibration time to a minimum.

 

 

 

Universal Insert Shape

The design of the insert enables very small masses to be weighed with very high accuracy and protects the mass standard from jamming. The UMA automatic comparators allow the comparison of all known shapes of mass standards, even wires, using a single universal insert.

 

 

 

Measurement of Ambient Conditions Directly in the Weighing Chamber

The UMA Automatic Mass Comparator is equipped with a high-end thermo-hygrobarometer, which enables real-time testing of ambient conditions. The device features very high measurement readability: pressure at 0.001 hPa, humidity at 0.01% and temperature at 0.001°C.

 

 

 

 

Real-Time Vibration Measurement

Thanks to a vibration sensor inside the electronics, the UMA series comparators analyse and identify the source of vibration. The sensor makes it possible to determine whether vibrations from the ground or other sources affect the measurement result.

 

 

 

Compact Design

The UMA series comparators have been designed to be adaptable to any laboratory environment. The devices’s dimensions allow it to be placed on a standard-sized anti-vibration table.

 

 

 

Built-in Assistant for Setting the Mass Standards

Additional software supervises the insertion of mass standards into the comparator’s magazine; thus, the same item will not be used several times.

 

 

 

Dedicated Software

Friendly and functional software means that the entire calibration plan takes only a few minutes to prepare. As the software allows you to memorise the comparison plans, you can use them again and again, saving you time.
 
The comparator saves all comparator reports and ambient conditions in dedicated databases. This means easy access to the data and speeds up its ripping as a printout.

 

 

Méréshatár (Max)210 g
Leolvashatóság [d]0,001 mg
Teherfelvevő méreteiø30 mm
Működési hőmérséklet+15 – +30 °C
Relatív páratartalom40% – 60%
Csomagolási méretek Szélesség × Mélység × Magasság1200×1000×1566 mm
Nettó tömeg115 kg
Bruttó tömeg205 kg
Tápegység100 – 240 V AC 50/60 Hz
Kommunikációs interfész2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi, Hotspot
Kijelző10″-es színes grafikus érintőképernyő
Pontosításbelső (automatikus)
Szabványos ismételhetőség [max. 5%]2,5 µg
Szabványos ismételhetőség [max.]4 µg
Linearitás±10 µg
Beállási idő30 s
Üzemi hőmérséklet-változási sebesség±0,5 °C / 12 h (±0,3 °C / 4 h)
A relatív páratartalom változási sebessége±5% / 12 h (3% / 4 h)
Mérleg méretei700×585×720 mm
Vezérlőberendezés méretei460×250×195 mm
Tár30
E1 kalibrációs tartomány1 – 200 g
E2 kalibrációs tartomány1 – 200 g
F1 kalibrációs tartomány1 – 200 g
F2 kalibrációs tartomány1 – 200 g
Elektronikus kompenzásálási tartomány-1 g – +10 g
Excentricitás (vizsgált terhelésnél)0 mg
Külső kiegészítő súlyok-
Megengedett ismételhetőség6 µg
Kiegészítő súlyokbelső (automatikus)
E0 kalibrációs tartomány1 – 200 g *
  • Levegősűrűség-korrekció
  • ALIBI-memória
  • Környezeti paraméterek figyelése
  • Állatmérlegelés
  • Automatikus tolóajtó
  • Önteszt
  • Testtömegindex (BMI)
  • Ellenőrző mérlegelés
  • Sűrűségmeghatározás
  • Differenciális mérés
  • Adagolás
  • Száraz tömeg meghatározása
  • Szárítási módok
  • Receptúrakészítés
  • GLP-eljárások
  • Beépített akkumulátor
  • Infravörös érzékelők
  • Címkézés
  • Tömegmérés titrátorhoz
  • Mikrohullámú szárítás
  • Nedvességtartalom-meghatározás
  • Áthelyezhető finomtartomány
  • Mérés newtonban
  • Előrecsomagolt áruk ellenőrzése
  • Darabszámlálás
  • Csúcsértéktárolás
  • Százalékos mérés
  • Pipetták kalibrálása
  • Plusz/mínusz ellenőrzés
  • Választható mértékegység
  • Mintaszárítás
  • Statisztikai minőségellenőrzés
  • Statisztika
  • Összegzés
  • Tranzakciók kezelése
  • Mérlegtálca alatti mérés
  • Wi-Fi
  • További információs sor
  • Színes érintőképernyő
  • Kommunikációs interfészek
  • Adatátvitel USB-adathordozóval
  • Elektronikus vízszintjelző
  • Ergonomikus mechanikai kialakítás
  • Kiegészítő funkcióbillentyűk
  • Hevítő serpenyő
  • Infravörös közelítésérzékelők
  • Interfészek
  • Vízszintbeállító rendszer
  • Működési módok
  • Hordozhatóság
  • SMARTLab
  • USB-csatlakozó a mérleg előlapján
  • CE-megfelelőség
  • 2 év garancia

Termékdokumentáció

Tanúsítványok és megfelelőség

További dokumentumok

Automatikus tömegkomparátorok Megnyitás külön ablakban
Az UMA sorozat automatikus tömegkomparátora Megnyitás külön ablakban
RMCS – Radwag tömegkomparátor-rendszer Megnyitás külön ablakban
ELLIPSIS – Új mérleg a RADWAG-tól Megnyitás külön ablakban
ELLIPSIS – Élvonalbeli, innovatív, új Megnyitás külön ablakban
ELLIPSIS – Bejelentkezés beolvasással vagy érintéssel Megnyitás külön ablakban
Távoli VPN-támogatás az ELLIPSIS mérlegeken Megnyitás külön ablakban
ELLIPSIS – Korlátlan csatlakozási lehetőségek Megnyitás külön ablakban
RADWAG tömegkomparátorok Megnyitás külön ablakban