UYA 6.5Y.KO  Mass Comparator

Code: WL-408-0007

Compare products
Quote list
Views2

UYA6.5Y.KO

 
RADWAG’s latest line of comparators enables calibration of mass standards and weights according to OIML (R-111) recommendations from 1 mg to 5 g for class E1 and below. The comparators are used to ensure consistency of mass measurements and verification of mass standards in accordance with the requirements of legal metrology. RADWAG mass comparators have gained recognition of calibration laboratories in many countries of the world.

 

 

 

 

Laboratory balance with an enclosed weighing chamber and separate touchscreen terminal

Automatically Opened Weighing Chamber

The UYA 6.5Y.KO comparator consists of two parts. One of them contains an electronic module, the other – a precise mechanical measuring system. This solution guarantees the elimination of the influence of temperature changes (heating of electronic components) on the comparator’s indications. The comparator is equipped with an aesthetically pleasing weighing chamber in the shape of a cylinder, with a glass blow-out cover, closed and opened automatically. All chamber components are made of glass or metal, minimising the influence of electrostatic fields on the weighing result.

 

 

 

Laboratory balance inside a glazed protective chamber

Difficult Ambient Conditions in the Room? We Have the Solution!

Standard equipment of the UYA 6.5Y.KO mass comparator is an anti-draft chamber, which minimises the influence of imperfect weighing room conditions (draughts, drafts) on the readings. The mass comparator is placed inside the chamber. Sliding side windows provide unobstructed access to the weighing chamber.

 

 

 

Larger Screen (10’’)

means more information in one place and the possibility to use the comparator working mode to change the number of cycles, method to be compared, etc. The comparator mode significantly simplifies calibration, especially when combined with software such as RMCS, which automates and records the entire process and thus provides full documentation.

 

 

 

Increase Productivity in Your Laboratory!

A dedicated software program, RMCS, is used for the comprehensive implementation of calibration procedures in the laboratory. RMCS manages the entire calibration process – from the acceptance of the order, through the execution of the procedure to the issuing of the calibration certificate. The work of the comparators in combination with the calibration process control software means greater efficiency, reliable measurement results, comprehensive calibration documentation and lower labour costs.

 

 

CAUTION:
In order to carry out the weighing process by means of microbalance and ultra-microbalances correctly, it is necessary to prepare the workstation and to operate the device as required.
Usage and installation guidelines are to found in the following document: Installation and usage conditions for ultra-microbalances and microbalances.

 

 

Maximum capacity [Max]6,1 g
Readability [d]0,1 µg
Weighing pan dimensionsø16 mm
Operating temperature+15 – +30 °C
Relative humidity40% – 60%
Packaging dimensions W x D x H655×755×445 mm
Net weight10,6 kg
Gross weight16,5 kg
Communication interface2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi, Hotspot
Display10″ graphic colour touchscreen
Adjustmentinternal (automatic)
Standard repeatability [5% Max]0,2 µg
Standard repeatability [Max]0,4 µg
Linearity±3 µg
Stabilization time30 s
Operating temperature change rate±0,5 °C / 12 h (±0,3 °C / 4 h)
Relative humidity change rate±2% / 4 h
Weighing device dimensions370×160×175 mm
Controling device dimensions249×170×72 mm
E1 Calibration Range1 mg – 5 g
E1 Calibration Range1 mg – 5 g
E2 Calibration Range1 mg – 5 g
F1 Calibration Range1 mg – 5 g
F2 Calibration Range1 mg – 5 g
M1 Calibration Range1 mg – 5 g
M2 Calibration Range1 mg – 5 g
Electric compensation range0 – +6,1 g
Eccentricity (tested load)1d / 1 mm
Supplementary weights external-
Anti-draft chamber dimensions560×350×255 mm
Chamber packaging size820×840×630 mm
Permissible repeatability0,6 µg
Supplementary weights internal-
  • Air density correction
  • ALIBI Memory
  • Ambient conditions monitoring
  • Animal weighing
  • Automatic sliding door
  • Autotest
  • BMI
  • Checkweighing
  • Density determination
  • Differential weighing
  • Dosing
  • Dry mass determination
  • Drying modes
  • Formulation
  • GLP Procedures
  • Internal battery
  • IR sensors
  • Labelling
  • Mass for titrator
  • Microwave drying
  • Moisture content analysis
  • Moveable range
  • Newton unit measurement
  • Packaged Goods Control
  • Parts counting
  • Peak hold
  • Percent Weighing
  • Pipettes Calibration
  • Plus/Minus Control
  • Replaceable unit
  • Samples drying
  • Statistical Quality Control
  • Statistics
  • Totalizing
  • Transactions
  • Under-pan weighing
  • Wi-Fi
  • Additional information line
  • Colour Touch Screen
  • Communicationinterfaces
  • Data exchange throughUSB storage devices
  • Electroniclevel indicator
  • Ergonomic Mechanical Design
  • Extra function keys
  • Grill pan
  • Infraredproximity sensors
  • Interfaces
  • Levelling System
  • Modes
  • Portability
  • SMARTLab
  • USB at the Balance Front
RADWAG Mass comparators (EN) Open video
RMCS - Radwag Mass Comparator System Open video
ELLIPSIS – New Balance by RADWAG Open video
ELLIPSIS – Cutting Edge, Innovative, New Open video
ELLIPSIS – Scan or Tap to Log In Open video
Remote VPN Support on ELLIPSIS Balances Open video
ELLIPSIS – Unlimited Connections Open video
RADWAG Mass Comparators Open video