Select a configuration to view its description.
MA210.5Y.NS
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50.5Y.WH
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50/1.5Y.WH
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA110.5Y.NS
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA200/1.5Y.WH
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50/1.5Y
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50.5Y
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA110.5Y
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA210.5Y.WH
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50.5Y.NS
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA200/1.5Y.NS
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA110.5Y.WH
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA210.5Y
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz
Moisture Analyzer with 10″ ELLIPSIS Terminal
Looking for a moisture analyzer that determines moisture or dry matter content with impressive accuracy, and also performs a digital audit, responds to voice commands and communicates with you through ambient light?
The RADWAG MA 5Y moisture analyzer from the ELLIPSIS series offers four drying profiles, four drying finish modes, drying temperatures of up to 160 °C, advanced user verification and full compliance with 21 CFR Part 11.
Discover the functionality of the ELLIPSIS series of moisture analyzers:
MA 5Y Moisture Analyzer – Key Features
- 4 drying profiles: standard, mild, fast and step
- Drying temperature up to 160 °C
- 4 drying finish modes: automatic, manual, time-defined and user-defined
- 10″ ELLIPSIS terminal with widgets, graphs, statuses and measurement history
- User verification: password, RFID card, fingerprint and face recognition
- 21 CFR Part 11 / EU GMP Annex 11 compliance for the pharmaceutical industry
- Modbus TCP/IP communication for automation integration

Four Drying Profiles for Accurate Moisture Content Determination
- The standard profile is the drying profile used most often. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat at full power at the initial stage of the process. An example of such a substance is leather.
- Use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile is ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You choose the temperature values and heating duration experimentally.

What Drying Temperature Should I Set? Up to 160 °C

How Do I Finish the Drying? Four Finish Modes
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement ends automatically. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed, regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When all volatile components are removed from a sample, its mass should by definition be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), all volatile components are considered to have been removed from its structure.

10-Inch ELLIPSIS Terminal Display
A bigger 10″ screen means more information in one place. On the new ELLIPSIS terminal you see up to 3 screens, widgets, graphs, statuses, notes and a handy measurement history. The terminal also confirms that your moisture analyzer is ready for use, and informs you when the analyzer needs an inspection or a periodic audit of its accuracy and sensitivity.

Uncompromising User Verification: Password, RFID, Fingerprint, Face Recognition

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The colour of the light tells you about the status of the moisture analyzer, process results, procedures and alerts – at a glance, even from a distance.

Hotspot – Use the Moisture Analyzer From Your Smartphone, Tablet or Computer

Live Note – Note Down Your Conclusions

21 CFR Part 11 & EU GMP Annex 11 Compliant Moisture Analyzer
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP – Easy Integration With Industrial Automation
* RFID ISO/IEC 14443 Type A, 13.56 MHz
MA50/1.5Y.NS
Do you need a moisture analyzer that not only determines moisture or dry matter content with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages?
If so, learn about the functionality of the ELLIPSIS series of moisture analyzers:

It Dries in 4 Ways
- The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
- The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
- You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
- The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

What Drying Temperature Should I Set?

How Do I Finish the Drying? In 4 Ways
-
Automatic mode
You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. -
Manual mode
You terminate the measurement yourself by pressing the STOP button. -
Time-defined mode
The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! -
User-defined mode
When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure.

10-Inch Display
Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity.

Uncompromising User Verification

Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User
The light colour will tell you about status, process results, procedures, or alerts.

Hotspot

Live Note – Note Down Your Conclusions

21 CFR Part 11
- Full data security
- Electronic signatures
- Validations
- Electronic records
- Audit trails

Modbus TCP/IP
* RFID ISO/IEC 14443 Type A, 13.56 MHz


















































































































