The LDS.2.Y liquid dosing system has been designed for applications requiring precise, controlled dispensing of liquids in a specified volume, with an accuracy of 1 mg.
The system consists of three cooperating components:
Dosing unit
The dosing unit consists of two pumps responsible for maintaining constant pressure within the system, together with control electronics and a liquid dispensing head. Maintaining stable pressure is essential to achieving the required dosing accuracy and repeatability.
5Y Weighing Terminal
The 5Y Weighing Terminal, equipped with dedicated dosing software, acts as the master control unit for the dosing process, executing a user-defined algorithm.
Precision weighing module
The precision weighing module provides feedback within the system. It continuously monitors the actual mass of the dispensed liquid and transmits this information to the weighing terminal. The terminal controls the dosing unit to ensure that the target liquid volume falls within the required tolerance. Using the weighing module in a closed-loop feedback system compensates for dosing inaccuracies resulting from flow variations caused by changes in pressure or operating conditions.
Features of the LDS.2.Y Liquid Dosing System:
Wide dosing range from 10 mg to 200 g.
Automatic process control based on mass measurement using a closed-loop feedback system.
Dosing stops automatically once the target value is reached, with an accuracy of 1 mg.
Electronic dosing process control system ensuring high process repeatability.
The system is equipped with two pumps that maintain constant pressure to ensure the required dosing accuracy and repeatability.
Adjustable dosing head height allows the use of vessels of different sizes.
Maximum capacity [Max]
1000 g
Readability [d]
1 mg
Weighing pan dimensions
ø56 mm
Operating temperature
+10 – +40 °C
Relative humidity
40% – 80%
Protection class
IP 43
Optional interfaces
RS485, 2 IN/2 OUT
Power supply
12 – 24 V DC
Communication interface
RS232, Ethernet TCP/IP
Display
10″ graphic colour touchscreen
Adjustment
internal
Weighing pan material
Stainless steel
Linearity
±3 mg
Stabilization time
2 s
Device dimensions W x D x H
module: 254x127x138 mm dispenser: 309x400x340 mm terminal: 249x170x85 mm
Repeatability
1,5 mg
Housing
aluminum
Warm-up time after connection to power
1 h
Maximum flow rate (100 mbar)*
0,1160 g/s (7 g/min)
Maximum flow rate (450 mbar)*
0,3450 g/s (21 g/min)
Dispense speed (1 g) at 100 mbar*
12 s
Dispense speed (1 g) at 450 mbar*
8 s
Dispense speed (10 g)* at 100 mbar*
90 s
Dispense speed (10 g)* at 450 mbar*
40 s
Dispense speed (5 g)* at 100 mbar*
48 s
Dispense speed (5 g)* at 450 mbar*
22 s
Viscosity range
Low-viscosity solvents (<20 cP), e.g. water, acetonitrile, methanol, ethanol, DMSO