The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.150.H7/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.300.H8/9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.300.H6/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.6000.H9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.300.H7/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H8/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.1500.H10/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.3000.H10/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.3000.H8/9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.1500.H8/9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H7/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.3000.H8/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.3000.H9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H8/9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.1500.H7/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.6000.H10/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.300.H9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.300.H8/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H10/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.150.H6/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.600.H6/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
HX7.4.1500.H9/Z
The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP 66 / 69, makes it suitable for use in industry. The four-sensor weighing system ensures accurate weighing regardless of how the load is distributed on the platform, which is particularly important during intensive daily use. The lift-up platform makes it easy to keep the area under the scales clean, whilst the modern weighing terminal enables not only weighing but also dosing, piece counting, labelling and deviation checks. Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds.
Ergonomics in industry
Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs.
Databases
The weighing software includes built-in databases used to store information related to scale operation. The most important databases include: products, users, recipes, packaging, customers, and ALIBI memory. Each database has a defined record limit. Database editing is only possible after logging in as an administrator. The system allows: adding new records, editing data, deleting individual entries, deleting the entire database content, and fast searching by name or code. Data can be imported and exported using a USB flash drive. Each database is stored in a separate file. The database system improves the organization of scale operation, automates the weighing and dosing process, and enables fast management of information stored in the device.
Foundation frame included in the set
To install the scale correctly, you must (as the customer) assemble the frame supplied with the unit. To prepare the installation site correctly, please refer to the document ‘Technical documentation’ in the ‘Documentation’ section. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.
Select a configuration to view its specifications.
Maximum capacity [Max]
1500 kg
Minimum load
10 kg
Readability [d]
500 g
Tare range
-1500 kg
Weighing pan dimensions
1200×1200 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1400×1400×550 mm
OIML Class
III
Verification unit [e]
500 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
130 kg
Gross weight
185 kg
Max readability for non-verified scale
200 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
150 kg
Minimum load
1 kg
Readability [d]
50 g
Tare range
-150 kg
Weighing pan dimensions
1000×1000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1200×1200×530 mm
OIML Class
III
Verification unit [e]
50 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
103 kg
Gross weight
130 kg
Max readability for non-verified scale
20 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
300 kg
Minimum load
2 kg
Readability [d]
100 g
Tare range
-300 kg
Weighing pan dimensions
1200×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1400×550 mm
OIML Class
III
Verification unit [e]
100 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
176 kg
Gross weight
220 kg
Max readability for non-verified scale
50 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
300 kg
Minimum load
2 kg
Readability [d]
100 g
Tare range
-300 kg
Weighing pan dimensions
800×800 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1000×1000×530 mm
OIML Class
III
Verification unit [e]
100 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
65 kg
Gross weight
105 kg
Max readability for non-verified scale
50 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
6000 kg
Minimum load
40 kg
Readability [d]
2 kg
Tare range
-6000 kg
Weighing pan dimensions
1500×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1700×550 mm
OIML Class
III
Verification unit [e]
2 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
285 kg
Gross weight
365 kg
Max readability for non-verified scale
1 kg
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
300 kg
Minimum load
2 kg
Readability [d]
100 g
Tare range
-300 kg
Weighing pan dimensions
1000×1000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1200×1200×530 mm
OIML Class
III
Verification unit [e]
100 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
90 kg
Gross weight
135 kg
Max readability for non-verified scale
50 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
1200×1200 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1400×1400×550 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
144,7 kg
Gross weight
181,3 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
1500 kg
Minimum load
10 kg
Readability [d]
500 g
Tare range
-1500 kg
Weighing pan dimensions
1500×2000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
2200×1700×600 mm
OIML Class
III
Verification unit [e]
500 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
320 kg
Gross weight
370 kg
Max readability for non-verified scale
200 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
3000 kg
Minimum load
20 kg
Readability [d]
1 kg
Tare range
-3000 kg
Weighing pan dimensions
1500×2000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
2200×1700×600 mm
OIML Class
III
Verification unit [e]
1 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
290 kg
Gross weight
375 kg
Max readability for non-verified scale
500 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
3000 kg
Minimum load
20 kg
Readability [d]
1 kg
Tare range
-3000 kg
Weighing pan dimensions
1200×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1400×550 mm
OIML Class
III
Verification unit [e]
1 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
165 kg
Gross weight
235 kg
Max readability for non-verified scale
500 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
1500 kg
Minimum load
10 kg
Readability [d]
500 g
Tare range
-1500 kg
Weighing pan dimensions
1200×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1400×550 mm
OIML Class
III
Verification unit [e]
500 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
160 kg
Gross weight
225 kg
Max readability for non-verified scale
200 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
1500×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1700×650 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
212,7 kg
Gross weight
250 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
1000×1000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1200×1200×530 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
90 kg
Gross weight
135 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
3000 kg
Minimum load
20 kg
Readability [d]
1 kg
Tare range
-3000 kg
Weighing pan dimensions
1200×1200 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1400×1400×550 mm
OIML Class
III
Verification unit [e]
1 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
135 kg
Gross weight
195 kg
Max readability for non-verified scale
500 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
3000 kg
Minimum load
20 kg
Readability [d]
1 kg
Tare range
-3000 kg
Weighing pan dimensions
1500×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1400×550 mm
OIML Class
III
Verification unit [e]
1 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
205 kg
Gross weight
275 kg
Max readability for non-verified scale
500 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
1200×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1700×550 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
175,7 kg
Gross weight
221,3 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
1500 kg
Minimum load
10 kg
Readability [d]
500 g
Tare range
-1500 kg
Weighing pan dimensions
1000×1000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1200×1200×530 mm
OIML Class
III
Verification unit [e]
500 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
100 kg
Gross weight
145 kg
Max readability for non-verified scale
200 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
6000 kg
Minimum load
40 kg
Readability [d]
2 kg
Tare range
-6000 kg
Weighing pan dimensions
1500×2000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
2200×1700×600 mm
OIML Class
III
Verification unit [e]
2 kg
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
355 kg
Gross weight
445 kg
Max readability for non-verified scale
1 kg
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
300 kg
Minimum load
2 kg
Readability [d]
100 g
Tare range
-300 kg
Weighing pan dimensions
1500×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1700×550 mm
OIML Class
III
Verification unit [e]
100 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
212,7 kg
Gross weight
250 kg
Max readability for non-verified scale
50 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
300 kg
Minimum load
2 kg
Readability [d]
100 g
Tare range
-300 kg
Weighing pan dimensions
1200×1200 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1400×1400×550 mm
OIML Class
III
Verification unit [e]
100 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
145 kg
Gross weight
180 kg
Max readability for non-verified scale
50 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
1500×2000 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
2200×1700×600 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
319,7 kg
Gross weight
370 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
150 kg
Minimum load
1 kg
Readability [d]
50 g
Tare range
-150 kg
Weighing pan dimensions
800×800 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1000×1000×530 mm
OIML Class
III
Verification unit [e]
50 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
76 kg
Gross weight
100 kg
Max readability for non-verified scale
20 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
600 kg
Minimum load
4 kg
Readability [d]
200 g
Tare range
-600 kg
Weighing pan dimensions
800×800 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1000×1000×530 mm
OIML Class
III
Verification unit [e]
200 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
65 kg
Gross weight
105 kg
Max readability for non-verified scale
100 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Maximum capacity [Max]
1500 kg
Minimum load
10 kg
Readability [d]
500 g
Tare range
-1500 kg
Weighing pan dimensions
1500×1500 mm
Operating temperature
-10 – +40 °C
Relative humidity
10% – 80% RH no condensation
Protection class
IP 66 / 69 construction, IP 66 / 67 terminal
Packaging dimensions W x D x H
1700×1700×550 mm
OIML Class
III
Verification unit [e]
500 g
Storage temperature
-10 – +50 °C
Construction
Stainless steel AISI304
Net weight
195 kg
Gross weight
255 kg
Max readability for non-verified scale
200 g
Optional interfaces
USB (M12 4P), RS485, RS232, Profibus (Dp SLAVE), PROFINET (RJ45), EtherNet/IP (RJ45), 12 IN / 12 OUT, 4-20mA, 0-10V
Optional power supply
12 – 24 V DC
Power supply
100 – 240 V AC 50/60 Hz
Cable length
3 m
Communication interface
RS232, USB-A, 4IN, 4OUT, Ethernet, Modbus TCP/IP
Display
7” graphic colour
Max number of platforms
2
Indicator
PUE HX7
Keypad
membrane
Number of buttons
22
Power consumption max.
25 W
Select a configuration to view its manufacturer information.