Determining solid and liquid density with a weighing kit

on
Categories: Knowledge Base

A density kit provides the mechanical arrangement for obtaining the weighing values required by a density method. For a solid, comparing its behaviour in air and an immersion liquid uses buoyancy to relate mass and volume. Liquid measurements use a suitable reference arrangement.

A balance with a dedicated density mode can guide the sequence and calculate the result from the collected readings. This reduces manual calculation but does not remove the need for correct setup and input data.

Choose the kit for the instrument and sample type. Control the liquid conditions, prevent bubbles and make sure the sample is supported as intended. Review the measurement procedure and corrections rather than treating an automatically calculated density as independent of preparation and handling.

Source: RADWAG technical article.

Views4